Kia Soul: Installation - Ignition Switch Assembly - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Ignition Switch Assembly / Installation

1.
Install the key lock cylinder.
2.
Install the key warning and immobilizer connector.
3.
Install the ignition switch assembly.
Tightening torque:
7 ~ 13 N.m (0.7 ~ 1.3, kgf.m, 5.0 ~ 9.6 lb-ft)
  
After assembling the ignition switch assembly, the head of bolt must be broken.
4.
Install the steering column shrouds and crash pad lower panel.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

    Immobilizer System
    ...

    See also:

    Inspection
    Clutch cover assembly 1. Check the diaphragm spring end for wear and uneven height. 2. Check the pressure plate surface for we ...

    License Lamps Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after loosening the mounting scre ...

    Rear Wiper Motor Removal
    1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (B) after removing rear wiper HEX nut ...