Kia Soul: Inspection
Clutch cover assembly |
1. |
Check the diaphragm spring end for wear and uneven height.
|
2. |
Check the pressure plate surface for wear, cracks and color change.
|
3. |
Check the rivets for looseness and replace the clutch cover assembly
if necessary.
|
Clutch disc assembly |
1. |
Check the clutch facing for loose rivets, uneven contact, deterioration
due to seizure, adhesion of oil, or grease, and replace the clutch disc
if defective.
|
2. |
Check for the torsion spring play and damage and if defective,
replace the clutch disc.
|
3. |
Measure the depth from a clutch lining surface to a rivet. If
the measured value is less than the specification below, replace it.
|
Removal
1. Remove the transaxle assembly. G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle") G 2.0 GDI (Refer to Manual Transaxle System - &qu ...Installation
If reinstalling used cover, the cover should be installed with its clutch disc as a set. 1 ...See also:
Cooling Fan Circuit Diagram
...
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM)
or when providing additional keys to the vehicle owner.
...
Torque Converter Control Solenoid Valve (T/CON_VFS). Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector (A).
3.
Measure resistance bet ...