Kia Soul: TPMS Sensor Removal
Kia Soul 2014-2019 PS Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor Removal
1. |
Remove the tire.
(Refer to Tires/Wheels - "Tire")
|
2. |
Remove the screw with torx driver (A).
|
3. |
Remove the sensor body (A) from the valve (B) in the direction
of the arrow.
|
4. |
Use the valve mounting tool to pull out the valve until it is
entirely out of the lower hole.
|
5. |
Apply lubricant to the surface of the valve, and then mount it
through the valve hole of the wheel.
|
6. |
Apply soapy water or lubricant to the upper/lower bead section
of the tire.
|
7. |
In order to mount lower the beads, place the TPMS sensor at 5
o'clock, starting from the head of the tire replacement equipment.
|
8. |
Rotate the rim clockwise and press tire towards 3 o'clock to mount
the lower beads.
|
9. |
In order to mount the upper beads, press the tire towards 3 o'clock
and turn the rim clockwise.
|
10. |
Inject air into the tire until the beads are in the correct position.
|
11. |
Adjust the tire pressure according to the recommended tire pressure
for the vehicle.
|
12. |
If the TPMS sensor malfunctions, you must perform TPMS sensor
learning. Replace any faulty sensors and perform TPMS sensor learning.
|
TPMS Sensor Mode of Operation
ASIC Mode 1. Factory Mode The factory mode is the mode that allows the TPM sensor to transmit RF Frames and sample LF more often in the HKMC factory. T ...TPMS Sensor. Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...See also:
Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should
be worn low across the front of the pelvis or the pelvis, chest and shoulders, as
applicable; wearing the lap sectio ...
Installation
1.
Connect the connectors and install the BCM.
2.
Install the glove box housing and audio/AVN head unit.
...
Tire and loading information label
Type A
Type B
Type C
Type D
Type E
Type F
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number ...