Kia Soul: Installation - BCM (Body Control Module) - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / BCM (Body Control Module) / Installation

1.
Connect the connectors and install the BCM.
2.
Install the glove box housing and audio/AVN head unit.
3.
Connect the negative (-) battery teriminal.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the audio/ AVN head unit assembly. (Refer to Body Electrica ...

    BCM Diagnosis With GDS
    1. The body control module can diagnose by using the GDS more quickly. The BCM communicates with the GDS and then reads the input/output value and dr ...

    See also:

    Battery recharging
    WARNING - Risk of electrocution Never touch the electrical ignition system while the vehicle is running. This system works with high voltage which can "zap" you. Your vehicle has a maint ...

    Ignition Coil Inspection
    1. Measure the primary coil resistance between terminals (+) and (-). Standard value: 0.79Ω ± 15% ...

    Water pump Troubleshooting
    Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole of the water pump Visually ...