Kia Soul: Torque Converter Control Solenoid Valve (T/CON_VFS). Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Removal
1. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
2. |
Remove the drain plug (A) and drain the ATF totally and then reinstall
the drain plug.
|
3. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
4. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
5. |
Remove the wiring bracket (A).
|
6. |
Remove the air breather hose (A).
|
7. |
Remove the valve body cover (B).
|
8. |
Remove the solenoid valve connector (B) and the oil temperature
sensor (A).
|
9. |
Remove the solenoid valve support bracket (B) and the valve body
mounting bolt (A-1ea).
|
10. |
Remove the torque converter control solenoid valve (A).
|
Torque Converter Control Solenoid Valve (T/CON_VFS). Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...Torque Converter Control Solenoid Valve (T/CON_VFS). Installation
1. Install in the reverse order of removal. • Adding Automa ...See also:
Canister Installation
1.
Install in the reverse order of removal.
Canister mounting bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
...
Front Hub / Knuckle Installation
1.
Install in the reverse order of removal.
Use a SST (09581-11000) when ...
Rear Glass Removal
•
In order to remove the rear glass, use the tools shown
in the following figure:
...