Kia Soul: Removal
| 1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
| 2. |
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel")
|
| 3. |
Remove the back view camera (A) after loosening the mounting
screws.
|
Description
Back view camera will activate when the backup light is ON with the
ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the v ...
Installation
1.
Install the back view camera.
2.
Install the tailgate back panel and tailgate trim.
...
See also:
Airbag Module Disposal
Special tool required
Deployment tool 0957A-34100A
Before scrapping any airbags or side airbags (including those in a whole
vehicle to be scrapped), the airbags or side airbags ...
Rear Disc Brake. Components
1. Guide rod bolt
2. Bleed screw
3. Caliper carrier
4. Caliper body
5. Brake pad
6. Pad retainer
...
SS-A Solenoid Valve(ON/OFF). Specifications
ON/OFF Solenoid Valve(SS-A)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
Internal resistance(Ω)
...