Kia Soul: Description
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Back View Camera System / Description
Back view camera will activate when the backup light is ON with the
ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle
through the monitor while backing-up.
This system is a supplementary function only. It is the responsibility
of the driver or always check the inside/ outside rearview mirror
and the area behind the vehicle before and while backing up because
there is a dead zone that can't see through the camera.
|
Circuit Diagram
...Removal
1. Remove the tailgate trim. (Refer to Body - "Tailgate Trim") 2. Remove the tailgate back panel. ...See also:
Passenger Airbag (PAB) Module. Description
Passenger Airbag (PAB) module is located in the passenger crash pad. This
PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending
of crash speed or the tightening ...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when the headlight high beams are switched
on.
To prevent th ...
Front Stabilizer Bar Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt (A) and then disco ...