Kia Soul: Removal
1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
To remove the emergency fastening device (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt after
pushing the lock pin (B).
|
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
4. |
Remove the center pillar upper trim.
(Refer to Body - "Center pillar trim")
|
5. |
After loosening the mounting bolt, then remove the front seat
belt upper anchor (A).
|
6. |
Disconnect the seat belt pretensioner connector (A).
|
7. |
Loosen the seat belt pretensioner mounting bolt (B) and remove
the seat belt pretensioner.
|
Components
...Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...See also:
Fender Garnish Replacement
•
Put on gloves to protect your hands.
...
Field Effect Transistor (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
2. TCM Terminal Function
Connector [A]
Pin
Description
Pin
Description
22
Overdrive clutch control solenoid valve (ODC_VFS)
73
Inhibitor switch signal "S4 ...