Kia Soul: Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the seat belt pretensioner with bolt (B).
|
4. |
Connect the seat belt pretensioner connector (A).
|
5. |
Install the front seat belt upper anchor (A).
|
6. |
Install the center pillar upper trim.
(Refer to Body - "Center pillar trim")
|
7. |
Install the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
8. |
Insert the seat belt to the emergency fastening device (A).
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Removal
1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. To remove the emergency fastening ...Emergency Fastening Device (EFD). Description
Emergency Fastening Device (EFD) is deployed with Belt Pretensioner at the same time to pull down the seat belt strongly If it gets into its deploy condition after a collision. It is located ...See also:
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the dark. ...
Seat Heater Switch Components
[First Row Seat]
Connector Pin Information
Connector
Pin NO
Function
Connector
Pin NO
Function
A
...