Kia Soul: Purge Control Solenoid Valve (PCSV). Description and Operation - Engine Control System - Engine Control / Fuel SystemKia Soul: Purge Control Solenoid Valve (PCSV). Description and Operation

Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV). Description and Operation

Description

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

    Injector. Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance betwee ...

    Purge Control Solenoid Valve (PCSV). Specifications
    Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

    See also:

    Rear Seat Latch Component Location
    1. Rear seat latch assembly ...

    Front Disc Brake. Replacement
    Front brake pads 1. Remove the front wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper body (A) up out of the wa ...

    Heated Oxygen Sensor (HO2S). Description and Operation
    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies ...