Kia Soul: Front Disc Brake. Replacement
1. |
Remove the front wheel & tire.
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper body (A) up
out of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
4. |
Compress the piston into the caliper body using the SST (09581-11000).
|
5. |
Place the caliper body (A) on the caliper carrier and tighten
the guide rod bolt (B).
|
6. |
Install the front wheel & tire.
|
Front Disc Brake. Removal
Brake caliper assembly 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...Front Disc Brake. Inspection
Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...See also:
Special Service Tools
Tool Name / Number
Illustration
Description
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...
Rail Pressure Sensor (RPS). Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures
the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built ...
Piston and Connecting Rod Components
1. Piston ring
2. Piston
3. Piston pin
4. Connecting rod
5. Connecting rod upper bearing
6. Connecting rod lower bearing
7. Connecting rod bearing cap
...