Kia Soul: Passenger Airbag (PAB) Module. Removal
1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove box housing")
|
3. |
Remove the passenger airbag mounting bolts (A).
|
4. |
Disconnect the passenger airbag connector (B).
|
5. |
Remove the crash pad.
(Refer to Body - "Main crash pad assembly")
|
6. |
Remove the mounting bolts from the crash pad and then remove the
passenger airbag (A).
|
Passenger Airbag (PAB) Module. Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...See also:
Seat belt - Driver's 3-point system with emergency locking retractor
To fasten your seat belt:
To fasten your seat belt, pull it out of the retractor and insert the metal tab
(1) into the buckle (2). There will be an audible "click" when the tab locks in ...
Seat Heater Switch Installation
First Row Seat
1.
Install the heater & A/C control unit.
(Refer to Heating, Ventilation And Air Conditioning - "Heater
& A/C Control Uni ...
Heater & A/C Control Unit (FATC) Components and Components Location
Components (1)
Control Panel (FATC Type)
Connector Pin Function
Connector
Pin NO
Function
Connector
Pin NO
Function
...