Kia Soul: Passenger Airbag (PAB) Module. Installation
Kia Soul 2014-2019 PS Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module. Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable from battery and wait for
at least thirty seconds before beginning work.
|
3. |
Place a passenger airbag on the crash pad and tighten the passenger
airbag (A) mounting bolts.
|
4. |
Install the crash pad.
(Refer to Body - "Main crash pad assembly")
|
5. |
Connect the passenger airbag connector (B).
|
6. |
Tighten the passenger airbag mounting bolts (A).
|
7. |
Reinstall the glove box housing.
(Refer to Body - "Glove box housing")
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the passenger airbag (PAB), confirm proper system
operation:
|
Passenger Airbag (PAB) Module. Removal
1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the glove box housing. ...Side Airbag (SAB) Module. Description
The Side Airbags (SAB) are installed inside the front seat and protect the driver and front passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by usi ...See also:
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window.
The driver has a power window lock button which ...
35R Clutch Control Solenoid Valve(35R/C_VFS). Circuit Diagram
...
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS
failure.
2.
When ESC or TCS fails, only the failed system control is pr ...