Kia Soul: Master Cylinder. Removal
Master Cylinder assembly
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the ECM.
(Refer to Engine Control / Fuel System - “Engine Control Module
(ECM)”)
|
3. |
Disconnect the brake fluid level switch connector (A), and remove
the reservoir cap.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
Disconnect the brake tube (A) from the master cylinder by loosening
the tube flare nut.
|
6. |
Remove the clutch hose. [MT only]
|
7. |
Remove the master cylinder (A) from the brake booster after loosening
the mounting nuts (A).
|
Master Cylinder Reservoir
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the ECM.
(Refer to Engine Control / Fuel System - “Engine Control Module
(ECM)”)
|
3. |
Disconnect the brake fluid level switch connector (A), and remove
the reservoir cap.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
After loosening the mounting screws (A), then remove master cylinder
reservoir.
|
Master Cylinder. Components
1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...Master Cylinder. Installation
Master Cylinder assembly 1. Install in the reverse order of removal. 2. After installing, bleed the brake system. (Refer to Brake s ...See also:
Front Oil Seal Components
1. Front oil seal
...
Heated Steering wheel. Inspection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Brown / Black) - 10kΩ (9kΩ ~ 11kΩ), 25°C
...
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the ...