Kia Soul: Master Cylinder. Installation
Master Cylinder assembly
1. |
Install in the reverse order of removal.
|
2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
3. |
After be equipped perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch - "Clutch Release Cylinder") - [MT only]
|
Master Cylinder Reservoir
1. |
Install in the reverse order of removal.
|
2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
3. |
After be equipped perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch - "Clutch Release Cylinder") - [MT only]
|
Master Cylinder. Removal
Master Cylinder assembly 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the ECM. (Refer ...Brake Line. Components
When installing brake hose, be sure to comply with the torque specification to prevent twisted hose. ...See also:
Cool box (if equipped)
You can keep beverage cans or other items cool in the glove box.
1. Turn on the air conditioning.
2. Slide the open/close lever of the vent installed in the glove box to the open
position.
3. ...
Adjustment
Inspect Glass Alignment
1.
Inspect the alignment of the movable glass (C) that is between
the front (A) and rear (B) glass and if needed adjust it.
...
Sound Settings
This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and
Balance.
Select [Sound Settings]
Select menu through
TUNE knob
Turn
TUNE knob left/right to set
...