Kia Soul: G-Sensor Calibration - ESC(Electronic Stability Control) System - Brake SystemKia Soul: G-Sensor Calibration

Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / G-Sensor Calibration

1.
Ignition "OFF", connect GDS.
2.
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
3.
Perform G-sensor calibration.
4.
Perform the " G-Sensor Calibration" procedure with GDS.

5.
Complete the “G-Sensor Calibration” procedure.
    Yaw-rate and G Sensor. Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

    ESC OFF Switch. Description
    1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...

    See also:

    Oil Pressure Switch Removal and Installation
    1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the ...

    Parking brake
    Applying the parking brake To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addition ...

    Brake Line. Removal
    1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder rese ...