Kia Soul: Brake Line. Removal
1. |
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservior with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Remove the brake hose mounting bracket bolt (A).
|
5. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear
|
6. |
Remove the brake hose clip (A).
|
7. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
Front
Rear
|
Brake Line. Components
When installing brake hose, be sure to comply with the torque specification to prevent twisted hose. ...Brake Line. Inspection
1. Check the brake tubes for cracks, crimps and corrosion. 2. Check the brake hoses for cracks, damage and fluid leakage. 3 ...See also:
Search
Press the
key
Set [
Search] through the
TUNE knob or
key.
Displays iPod® category list.
❈ Searching iPod® category is
key pressed, move to parent category. ...
Height adjustment
You can adjust the height of the shoulder belt anchor to one of the 3 positions
for maximum comfort and safety.
The height of the adjusting seat belt should not be too close to your neck. The
...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
Refer to the illustration in the “Manual climate control system”.
The air flow outlet port is ...