Kia Soul: Front Impact Sensor (FIS). Removal
|
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the air duct (A). [Left side only]
|
3. |
Disconnect the front impact sensor connector (A).
|
4. |
Loosen the mounting bolt and then remove the front impact sensor
(B) and extension harness.
|
Front Impact Sensor (FIS). Installation
• Do not turn the ignition switch ON and do not connect the battery cable while replac ...See also:
Head Lamp Leveling Actuator Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
Below content summarize the procedure for A/S using GDS.
No.
Procedure
1
Loc ...
ICM (Integrated Circuit Module) Relay Box Component
...
Input Speed Sensor. Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...