Kia Soul: Front Disc Brake. Removal - Brake System - Brake SystemKia Soul: Front Disc Brake. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Front Disc Brake. Removal

Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the hose eyebolt (C) and guide rod bolts (B) and then remove the front caliper body (A).
Tightening torque
Brake hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Guide rod bolts (B):
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

3.
Remove the pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).
4.
Loosen the caliper mounting bolts (B) and then remove the caliper carrier (A).
Tightening torque :
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

Front Wheel Brake disc
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the guide rod bolt (B) and pivot the caliper body (A) up out of the way.
3.
Remove the pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).
4.
Loosen the caliper mounting bolts (B) and then remove the caliper carrier (A).
Tightening torque :
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

5.
Remove the front brake disc by loosening the screws (A).
Tightening torque :
4.9 ~ 5.9 N.m (0.5 ~ 0.6 kgf.m, 3.6 ~ 4.3 lb-ft)

    Front Disc Brake. Components
    1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

    Front Disc Brake. Replacement
    Front brake pads 1. Remove the front wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper body (A) up out of the wa ...

    See also:

    Parking brake - Hand type
    Applying the parking brake To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addit ...

    Mood Lamp Circuit Diagram
    ...

    Checking the tire inflation pressure
    1.After driving approximately 4 ~6miles(7~10km or about 10min), stop at a safety location. 2.Connect connection hose (9) of the compressor directly to the tire valve. 3.Plug the compressor power c ...