Kia Soul: ESC Control Module. Installation
Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC Control Module. Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
| 3. |
After installation, bleed the brake system.
(Refer to ABS bleeding)
|
| 4. |
When you have replaced the HECU always perform variant coding.
|
Variant coding
| 1. |
Connect the GDS to the data link connector.
|
| 2. |
Turn the ignition "ON".
|
| 3. |
Select vehicle name and system.
|
| 4. |
Select the variant coding.
|
| 5. |
Perform variant coding according to the instructions on the screen.
|
| 6. |
Ignition "OFF" and then ignition "ON".
|
| 7. |
The variant coding is completed.
|
ESC Control Module. Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the ECM.
(Refer to Engine Control / Fuel Syst ...
Front Wheel Speed Sensor. Components
1. Front wheel speed sensor
2. Front wheel speed sensor connector
...
See also:
Description
Back view camera will activate when the backup light is ON with the
ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the v ...
Before starting
Close and lock all doors.
Position the seat so that all controls are easily reached.
Buckle your seat belt.
Adjust the inside and outside rearview mirrors.
Be sure that all lights work.
C ...
Intake Manifold Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air cleaner assembly.
...