Kia Soul: Description
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the memory of the ECM (Engine Control Module).
The engine operating conditions (speed, load, warm-up condition, etc.)
are detected by the various sensors. Based on these sensor signals and the ignition
timing data, signals to interrupt the primary current are sent to the ECM.
The ignition coil is activated, and timing is controlled.
Ignition System
...On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs. ...See also:
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, turn the power on GDS.
...
Component Location Index
Engine Room
[Gamma Engine]
1. Receiver-drier
2. Condenser
3. Ambient temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Asse ...
Operating door locks from inside the vehicle
With the door lock button
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark (2) on the button will be visible.
To lock a door, push the door lock ...