Kia Soul: Transmitter Code Registration (Using GDS)
1. |
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, turn the power on GDS.
|
2. |
Select the vehicle model and then do "CODE SAVING"
|
3. |
After selecting "CODE SAVING" menu, button "ENTER" key, then
the screen will be shown as below.
|
4. |
After removing the ignition key from key cylinder, push "ENTER"
key to proceed to the next mode for code saving. Follow steps 1
to 4 and then code saving is completed.
|
Transmitter Inspection
1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the batt ...Lighting System
...See also:
Sunglass holder
To open the sunglass holder, press the cover and the holder will slowly open.
Place your sunglasses with the lenses facing out.
To close the sunglass holder, push it up.
Do not place other ite ...
Operating door locks from outside the vehicle
Turn the key toward the front of the vehicle to unlock and toward the rear
of the vehicle to lock.
If you lock the driver’s door with a key, all vehicle doors will lock automatically.
Fr ...
Loss of the smart key
A maximum of 2 smart keys can be registered to a single vehicle.
If you happen to lose your smart key, you will not be able to start the engine.
You should immediately take the vehicle and remainin ...