Kia Soul: Cylinder Block Inspection
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Block / Cylinder Block Inspection
1. |
Using a gasket scraper, remove all the gasket material from the
top surface of the cylinder block.
|
2. |
Using a soft brush and solvent, thoroughly clean the cylinder
block.
|
3. |
Inspect the top surface of cylinder block for flatness.
Using a precision straight edge and feeler gauge, measure the
surface contacting the cylinder head gasket for warpage.
|
4. |
Inspect the cylinder bore.
Visually check the cylinder for vertical scratchs.
If deep scratchs are present, replace the cylinder block.
|
5. |
Inspect the cylinder bore diameter.
Using a cylinder bore gauge, measure the cylinder bore diameter
at position in the thrust and axial direction.
|
Cylinder Block Disassembly
• Use fender covers to avoid damaging painted surfaces. • ...Cylinder Block Reassembly
1. Install in the reverse order of disassembly. In case the cylinder bloc ...See also:
Specification
Air Conditioner
Item
Specification
Compressor
Type
6VSX14 (External Variable Displacement Swash Plate)
Oil type & Capacity
PAG (FD4 ...
Trip A/B
Tripmeter (1)
The tripmeter is the total driving distance since the last tripmeter reset.
- Distance range: 0.0 ~ 9999.9 mi. or km
To reset the tripmeter, press the RESET/
button on the ste ...
Ignition switch position
LOCK
The steering wheel locks to protect against theft. The ignition key can be removed
only in the LOCK position. When turning the ignition switch to the LOCK position,
push the key inward at ...