Kia Soul: Control Shaft Complete Installation - Manual Transaxle Control System - Manual Transaxle SystemKia Soul: Control Shaft Complete Installation

Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Installation

1.
Install in the reverse order of removal.
  
•
When installing, set control shaft lever to neutral position.

•
When installing, apply the sealant as shown in the illustration.

Specified sealant : LOCTITE 5060 or Anaerobic adhesives type J (For flange)

2.
After installing, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.
    Control Shaft Complete Removal
    1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

    See also:

    Components
    ...

    Wheel alignment and tire balance
    The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...

    Heated Oxygen Sensor (HO2S). Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between th ...