Kia Soul: Brake Switch. Inspection - Brake System - Brake SystemKia Soul: Brake Switch. Inspection

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Switch. Inspection

1.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
(2)
The stop lamp switch is in good condition if there is no continuity when plunger is pushed.
    Brake Switch. Removal
    1. Disconnect the brake switch connector (A). 2. Pull the locking plate (A) as indicated by the arrow. 3. ...

    Brake Switch. Installation
    1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45В° ...

    See also:

    Push-starting
    Vehicles equipped with automatic transaxle lock system cannot be push-started. Follow the directions in this section for jump-starting. WARNING Never tow a vehicle to start it because the sudden su ...

    Rear Pillar Trim Component Location
    1. Rear pillar trim ...

    SS-A Solenoid Valve(ON/OFF). Description
    SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...