Kia Soul: Brake Line. Inspection
| 1. |
Check the brake tubes for cracks, crimps and corrosion.
|
| 2. |
Check the brake hoses for cracks, damage and fluid leakage.
|
| 3. |
Check the brake tube flare nuts for damage and fluid leakage.
|
| 4. |
Check brake hose mounting bracket for crack or deformation.
|
Brake Line. Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder rese ...
Brake Line. Installation
1.
Install in the reverse order of removal.
Use a new washer (A) whenever ...
See also:
Input Speed Sensor. Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed senso ...
Components Location
1. Drive shaft
2. Lower arm
3. Front axle
4. Front strut assembly
5. Stabilizer bar
6. Steering gear box
7. Sub frame
8. Front stabilizer link
...
Roller Blind Installation
1.
Install the roller blind side bracket (A) fit into the guide groove
(B).
2.
Tighten the mounting screws after installing the ro ...