Kia Soul: Battery Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable (A).
|
2. |
Disconnect the positive (+) terminals (B) from the battery.
|
3. |
Remove the air cleaner. (Refer to Engine Mechanical System - "Air
Cleaner")
|
4. |
Remove the battery insulation pad.
|
5. |
Remove the battery mounting bracket (C) by loosening the mounting
bolt and then remove the battery (D).
|
6. |
Remove the ECM. (Refer to Engine Control/Fuel System - “Engine
Control Module (ECM)”)
|
7. |
Remove the battery tray (B) after removing the bolts (A).
|
Battery Adjustment
Battery Charging In general, vehicle battery charging system has three forms. 1. Constant current charge: The battery voltage gradually rises by charging with setti ...Battery Installation
1. Install in the reverse order of removal. Battery (-)terminal installation: 4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft) ...See also:
Front Strut Assembly Components
1. Strut assembly
2. Insulator
3. Strut bearing
4. Spring upper pad
5. Coil spring
6. Dust cover
7. Bumper rubber
8. Spring lower pad
...
Photo Sensor Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode.
The solar radiation received by its light receiving ...
Cylinder Head Cover Installation
1.
Install the cylinder head cover (A) with a new gasket (B).
Do ...