Kia Soul: Battery Adjustment - Charging System - Engine Electrical SystemKia Soul: Battery Adjustment

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Battery Adjustment

Battery Charging
In general, vehicle battery charging system has three forms.
1.
Constant current charge: The battery voltage gradually rises by charging with setting a constant current. If charging current and time are not managed correctly, the battery is over-charged, therefore charging should be stopped after confirming the completion of charging.
A.
General charge: Charging the battery for a long time with low current
B.
Quick charge: Charging the battery for a short time with high current
2.
Constant voltage charge: The battery charge current is gradually reduced by charging with setting a constant voltage.
3.
Constant current-Constant voltage charge: Charging with constant current and voltage to protect the battery damage
(1)
Initial Stage: Charging with constant current
(2)
Last Stage: Charging with constant voltage
  
Refer to the instruction manual provided by the battery charger equipment manufacturers for detailed charging procedures and precautions.
    Battery Components
    1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...

    Battery Removal
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable (A). 2. Disconnect the positive (+) terminals (B) from the ba ...

    See also:

    Room lamp
    Type B The light will turn on and off according to the switch position. (1) OFF The light stays off at all times. (2) DOOR The light comes on when any door (or tailgate) is opened regardless of ...

    Climate control air filter (if equipped)
    The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. ...

    Installtion
    1. With a putt knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire quarter fixed glass flange. ...