Kia Soul: Ambient Temperature Sensor Inspection
Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Disconnect ambient temperature sensor.
|
| 4. |
Check the resistance of the ambient temperature sensor between
terminals 1 and 2 whether it changes by changing the ambient temperature.
Specification
|
| 5. |
If the measured resistance is not within specification, substitute
with a known-good ambient temperature sensor and check for proper operation.
|
| 6. |
Replace the ambient temperature sensor if it is proved that there
is a problem with the sensor.
|
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
...
See also:
Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling the cover up.
3. Check the removed fuse; replace it if it is blown. To remove ...
Rear Door Latch Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside handle base (A) by p ...
Components
1. Windshield glass
2. Windshield glass moulding
...