Kia Soul: Rear Door Latch Replacement
1. |
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
|
2. |
Remove the rear door outside handle base (A) by pushing in the
lock pins located in the back.
|
3. |
Remove the rear door outside handle cable (A).
|
4. |
Disconnect the rear door latch connector (A).
|
5. |
Remove the rear door latch assembly (B) by pulling it in the direction
of the arrow.
|
6. |
Remove the rear door inside handle cage (A).
|
7. |
Remove the rear door inside handle cable (A) by pushing it rearward.
|
8. |
Install in the reverse order of removal.
|
Rear Door Latch Component Location
1. Rear door latch ...Rear Door Belt Outside Weatherstrip Replacement
1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, then remove the rear ...See also:
ISG system malfunction
The system may not operate when:
If the ISG related sensors or system error occurs, the yellow AUTO STOP indicator
()
on the instrument cluster will stay on after blinking for 5 seconds and t ...
CVVT (Continuously Variable Valve Timing) System
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
CVVT Oil Control Valve (OCV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the ...