Kia Soul: Accelerator Position Sensor (APS). Specifications
Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Accelerator Position Sensor (APS). Specifications
Specification
Accelerator Position |
Output Voltage (V)
[Vref = 5V] |
|
APS1 |
APS2 |
|
C.T |
0.7 ~ 0.8 |
0.28 ~ 0.48 |
W.O.T |
3.85 ~ 4.35 |
1.8 ~ 2.3 |
Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important senso ...Accelerator Position Sensor (APS). Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...See also:
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended for your ...
Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or
to install tire chains on your tires.
If snow tires are needed, it is necessary to select tires equivalent in size
and ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...