Kia Soul: Yaw-rate and G Sensor. Removal
Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / Yaw-rate and G Sensor. Removal
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
|
4. |
Remove the floor console.
(Refer to Body - "Floor console")
|
5. |
Remove the rear heating joint duct (A).
|
6. |
Pull up the lock of the SRSCM connector and disconnect the connector
(A).
|
7. |
Remove the SRSCM mounting bolts(3EA) from the SRSCM, then remove
the SRSCM.
|
Yaw-rate and G Sensor. Description
The yaw rate and G sensor is included inside the air bag control module (SRSCM). When the vehicle is turning with respect to a vertical axis the yaw rate sensor detects the yaw rate elec ...Yaw-rate and G Sensor. Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...See also:
Seat Heater Switch Inspection
First Row Seat
1.
Disconnect the negative (-) batttery terminal.
2.
Disconnect the A/C & heater controller connectors ...
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gen ...
Thermostat Removal
Disassembly of the thermostat would have an adverse effect, causing
a lowering of cooling efficiency.
...