Kia Soul: Water pump Removal - Cooling System - Engine Mechanical SystemKia Soul: Water pump Removal

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Water pump Removal

1.
Drain the coolant.
(Refer to Cooling System - "Coolant")
2.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
3.
Remove the water pump pulley(A).

Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

4.
Remove the water pump(A).

    Water pump Components
    1. Gasket 2. Water pump 3. Water pump pulley ...

    Water pump Inspection
    1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorma ...

    See also:

    Battery saver function
    The purpose of this feature is to prevent the battery from being discharged. The system automatically turns off the parking lights when the driver removes the ignition key and opens the drive ...

    Hazard Lamp Switch Installation
    1. Install the hazard switch in the center airvent assembly. 2. Connect the connector and install the center airvent assembly. ...

    Refrigeration Cycle
    ...