Kia Soul: Valve Body. Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body. Removal
1. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
2. |
Remove the drain plug (A) and drain the ATF totally and then reinstall
the drain plug.
|
3. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
4. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
5. |
Remove the wiring bracket (A).
|
6. |
Remove the air breather hose (A).
|
7. |
Remove the valve body cover (B).
|
8. |
Remove the solenoid valve connector (B) and the oil temperature
sensor (A).
|
9. |
Remove the valve body assembly (A).
|
Valve Body. Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regula ...Valve Body. Installation
1. Install in the reverse order of removal. • ...See also:
Exhaust pipe and muffler
Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration,
or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten
connections or replace part ...
Rear window wiper and washer switch
The rear window wiper switch is located at the end of the wiper and washer switch
lever. Turn the switch to the desired position to operate the rear wiper and washer.
ON - Normal wiper operation
...
GVWR (Gross vehicle weight rating)
This is the maximum allowable weight of the fully loaded vehicle (including all
options, equipment, passengers and cargo). The GVWR is shown on the certification
label located on the driver’s do ...