1. |
Install the timing chain cover.
(1) |
Before installing, remove the hardened sealant from the
cylinder block and ladder frame surface.
|
(2) |
Apply the liquid gasket(TB 1217H or LOCTITE 5900H) on
the surface between the cylinder head and the cylinder block.
Width :
3 ~ 5mm (0.1181~0.1969in.)
|
|
(3) |
Apply the liquid gasket, THREE BOND 1282B or THREE BOND
1216E on the water pump contact parts (A) of the timing chain
cover and THREE BOND 1217H or LOCTITE 5900H on the rest parts
(B).
Reassemble the cover within 5 minutes.
Width :
3.5 ~ 4.5 mm (0.1378 ~ 0.1772 in)
|
Remove oil or dust on the surface surely.
|
|
(4) |
Align the dowel pin of the cylinder block and the holes
of the oil pump.
|
(5) |
Tighten the bolts to install the timing chain cover (A).
Tightening torque
M8 bolts :
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4
lb-ft)
M6 bolts :
9.8 ~ 11.8 Nm (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
|
|
|
2. |
Install in the reverse order of removal.
|
•
Use fender covers to avoid damaging painted surfaces.
â ...
1. Timing chain
2. Timing chain guide
3. Timing chain arm
4. Timing chain auto tensioner
...
See also:
Sunshade
To open the sunshade
Press the sunshade open button (1). To stop the sliding at any point, press the
sunshade control switch momentarily.
To close the sunshade when the sunroof glass is closed ...
Windows
(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and ...
Specification
Smart Key Unit
Items
Specification
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
...