Kia Soul: Stowing the rear seat belt
The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use.
Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats when they are folded down.
After inserting the seat belt, tighten the belt webbing by pulling it up.
CAUTION - Seat belt guide
Remove the seat belt from the guides before using. If you pull the seat belt when it is stored in the guides, it may damage the guides and/or belt webbing.
Seat belts - Front passenger and rear seat 3-point system with combination locking
retractor
To fasten your seat belt:
Combination retractor type seat belts are installed in the rear seat positions
to help accommodate the installation of child restraint systems. Although a combination
re ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly
against the occupan ...
See also:
Registering your vehicle in a foreign country
If you plan to register your vehicle in a foreign country, you should confirm
that it conforms to the regulations in that country. Even if you successfully register
the vehicle in a foreign countr ...
Repair procedures
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...
Air bag collision sensors
(1) SRS control module
(2) Front impact sensors
(3) Side impact sensors
(4) Side pressure sensor
WARNING - Air bag sensors
Do not hit or allow any objects to impact the locations where air b ...