•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Loosen the side sill moulding mounting screws.
|
2. |
Using a screwdriver or remover, remove the side sill moulding
(A).
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
See also:
Radiator Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air duct (A).
3.
Separate the filler neck (A ...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
2. Lower the hood halfway and push down to securely lock in place.
WARNING
...
Injector. Specifications
Specification
Item
Specification
Coil Resistance (Ω)
1.5 ± 0.075 [20°C(68°F)]
...