Kia Soul: Roof Rack Replacement - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Roof Rack Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Rack Replacement

[Panorama Sunroof Type]
  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the roof rack front cover (A) and roof rack rear cover (B).
2.
Remove the roof rack side rail cap (C).
3.
After loosening the mounting nuts, then remove the roof rack assembly (D).
Tightening torque :
3.9 ~ 4.4 N.m ( 0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft )
4.
Using a screwdriver or remover, remove the rear roof garnish (E).
5.
Install in the reverse order of removal.
  
•
Replace any damaged clips.

1. Roof rack front cover
2. Roof rack rear cover
3. Roof rack side rail cap
 4. Roof rack assembly
5. Rear roof garnish

[Normal Roof Type]
  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the roof rack front cover (A) and roof rack rear cover (B).
2.
Remove the roof rack side rail cap (C).
3.
After loosening the mounting nuts, then remove the roof rack assembly (D).
Tightening torque :
3.9 ~ 4.4 N.m ( 0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft )
4.
Using a screwdriver or remover, remove the rear roof garnish (E).
5.
Using a screwdriver or remover, remove the front roof garnish (F).
6.
Install in the reverse order of removal.
  
•
Replace any damaged clips.

1. Roof rack front cover
2. Roof rack rear cover
3. Roof rack side rail cap
 4. Roof rack assembly
5. Rear roof garnish
6. Front roof garnish

    Body Side Moulding
    ...

    Roof Side Moulding Replacement
       • Put on gloves to protect your hands. ...

    See also:

    Exterior feature
    Roof rack If the vehicle has a roof rack, you can load cargo on top of your vehicle. The following specification is the maximum weight that can be loaded onto the roof rack. Distribute the load ...

    Input Speed Sensor. Specifications
    ▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1.8) 0.0472 ~ 0.0709 Output voltage(V) ...

    Operation
    Passive Functions The system allows the user to access the vehicle without having to perform any actions (e.g. RKE button pressing) with the SMART KEY FOB. It is sufficient that a va ...