Kia Soul: Rheostat Inspection
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Rheostat Inspection
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
| 3. |
Remove the lower crash pad switch assembly (A) by pushing
it.
|
| 4. |
Disconnect the connectors (A) from the lower crash pad switch
assembly.
|
| 5. |
Remove the rheostat switch (A).
|
| 6. |
Check for intensity of rheostat switch. If the light intensity
of the lamps changes smoothly without any flickering when the rheostat
is turned, it can be assumed that the rheostat is normal.
|
Hazard Lamp Switch Installation
1.
Install the hazard switch in the center airvent assembly.
2.
Connect the connector and install the center airvent assembly.
...
Fog Lamps Inspection
Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the terminals below. If continuity is
not as speci ...
See also:
Spark Plug On-vehicle Inspection
1.
Perform spark test
(1)
Remove the engine cover.
(2)
Remove the ignition coils.
...
75,000 miles or 60 months
❑ Inspect air cleaner filter
❑ Inspect air conditioning compressor, air conditioner refrigerant and performance
(if equipped)
❑ Inspect cooling system *1
❑ Inspect dri ...
Snowy or icy conditions
To drive your vehicle in deep snow, it may be necessary to use snow tires or
to install tire chains on your tires.
If snow tires are needed, it is necessary to select tires equivalent in size
and ...