Kia Soul: Replacement - Fender - Body (Interior and Exterior)Kia Soul: Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Fender / Replacement

  
•
Be careful not to damage the fender and body.
  
•
When removing the clips, use a clip remover.
1.
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
2.
Remove the A pillar garnish.
(Refer to Body Side Moulding - "A Pillar Garnish")
3.
Remove the side sill moulding.
(Refer to Body Side Moulding - "Side Sill Moulding")
4.
Using a clip remover, detach the clip, and remove the A pillar guard (A).
5.
Detach the clips and then remove the insulator pad (A).
6.
Loosen the front wheel guard mounting screws and bolt.
7.
Remove the front bumper side bracket (A) after loosening the screw and bolt.
8.
After loosening the mounting bolts and nut, then remove the fender assembly (A).
9.
Install in the reverse order of removal.
  
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
    Component Location
    1. Fender assembly ...

    Floor Carpet
    ...

    See also:

    Blower Motor Inspection
    1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a know ...

    Component Location
    1. Panorama sunroof 2. Panorama sunroof switch 3. Panorama sunroof motor & controller 4. Roller blind motor & slave controller ...

    High Mounted Stop Lamp Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the high mounted stop lamp trim (A). ...