Kia Soul: Removal
|
|
1. |
Remove both sides of the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim")
|
2. |
Remove both sides of the A pillar garnish.
(Refer to Body Side Moulding- "A Pillar Garnish")
|
3. |
Remove the cowl top cover.
(Refer to "Cowl Top Cover")
|
4. |
Remove the inside rear view mirror assembly.
(Refer to Mirror - "Inside Rear View Mirror")
|
5. |
Remove the LDWS unit.
(Refer to Body Electrical System - "Lane Departure Warning System
(LDWS) Unit")
|
6. |
Cut out the adhesive using a cutter (A).
|
7. |
Cut off the sealant on the edge (B) while pulling the piano wire
(A) left and right.
|
8. |
If a piano wire is visible inside the chassis, pull the piano
wire (A) line inside.
|
9. |
Cut off the sealant on (A-A), (B-B), (C-C), while pulling a piano
wire (A) left and right.
|
10. |
Remove the windshield glass (B) carefully using the glass holder
(A).
|
Components
1. Windshield glass 2. Windshield glass moulding ...Installtion
1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire windshield opening flange: ...See also:
Components
1. Cylinder block
2. Ladder frame
3. Crankshaft
4. Crankshaft upper bearing
5. Crankshaft lower bearing
6. Thrust bearing
7. Main bearing cap
8. Adapter plate
...
Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase
the luggage capacity of the vehicle.
WARNING - Folded down seatback
Never allow passengers sit on top of the folde ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...