Kia Soul: Rear Seat Assembly Replacement - Rear Seat - Body (Interior and Exterior)Kia Soul: Rear Seat Assembly Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Seat / Rear Seat Assembly Replacement

[Rear seat back assembly]
1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.

2.
Fold the rear seat back assembly.
3.
Remove the center hinge cover (A).
4.
Loosen the rear seat back mounting bolt (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)

5.
Remove the rear seat back assembly (A).
6.
Install in the reverse order of removal.
[Rear seat cushion assembly]
1.
Remove the trunk trim.
(1)
Remove the luggage cover board (A).
(2)
Remove the luggage box (A).
2.
Loosen the rear seat cushion mounting bolt (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)

3.
Remove the rear seat cushion assembly (A) by pushing it up.
4.
Disconnect the heater cushion connector (A).
[LH]

[RH]
5.
Install in the reverse order of removal.
    Rear Seat Assembly Component Location
    1. Rear seat back assembly [LH] 2. Rear seat back assembly [RH] 3. Rear seat cushion assembly ...

    Rear Seat Back Cover Component Location
    1. Rear seat back cover [LH] 2. Rear seat back cover [RH] ...

    See also:

    Front Impact Sensor (FIS). Description
    The Front Impact Sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

    Relay Box (Passenger Compartment) Component Location
    ...

    135,000 miles or 108 months
    ❑ Inspect air cleaner filter ❑ Inspect air conditioning compressor, air conditioner refrigerant and performance (if equipped) ❑ Inspect cooling system *1 ❑ Inspect dri ...