Kia Soul: Rear Bumper Beam Assembly Replacement
Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Beam Assembly Replacement
|
|
1. |
Remove the rear bumper cover.
(Refer to Rear Bumper - "Rear Bumper Cover")
|
2. |
Disconnect the bumper antenna connector (A) and license lamp connector
(B).
|
3. |
Remove the joint connector mounting clip (C).
|
4. |
Remove the rear bumper wiring harness mounting clips (A).
|
5. |
Remove the mounting clips (B), then remove the rear bumper beam
assembly (C) and then loosen the clips.
|
6. |
Install in the reverse order of removal.
|
Rear Bumper Beam Assembly Component Location
1. Rear bumper beam assembly ...Rear Door
...See also:
Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form
...
Automatic climate control system
1. Turn the ignition switch to the ON position.
2. Select the defrost position pressing defrost button ().
3. While holding the air conditioning button (A/C) pressed, press the air intake
contro ...
Front Hub / Knuckle Installation
1.
Install in the reverse order of removal.
Use a SST (09581-11000) when ...