Kia Soul: Parking Brake Lever. Removal
Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Lever. Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
| 1. |
Release the parking brake lever and parking brake cable is loose.
|
| 2. |
Remove the floor console assembly.
(Refer to Body - "Floor console")
|
| 3. |
Disconnect the connector (A) of parking brake switch.
|
| 4. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
| 5. |
Remove the parking brake lever assembly (A) after removing the
bolts.
|
Components
1. Parking brake lever
2. Parking brake cable
3. Equalizer assembly
...
Parking Brake Lever. Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
See also:
Component Location
1. Slide motor
2. Front height motor
3. Rear height motor
4. Recline motor
5. Lumbar support motor
6. Power seat switch
7. Recline switch
8. Lumba ...
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...