Kia Soul: Parking Brake Cable. Installation
Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Cable. Installation
1. |
Install the parking brake cable (A).
|
2. |
Install the parking brake cable (A), and then install the clip
(B).
|
3. |
Install the parking brake cable (B).
|
4. |
Install the parking brake cable adjuster, then adjust the parking
brake lever stroke by turning adjusting nut (A).
|
5. |
Release the parking brake lever fully, and check that parking
brakes do not drag when the rear wheels are turned. Readjust if necessary.
|
6. |
Make sure that the parking brakes are fully applied when the parking
brake lever is pulled up fully.
|
7. |
Install the rear console cover (A).
|
8. |
Install the rear tire and wheel.
|
Parking Brake Cable. Removal
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. ...Parking Brake Cable. Adjustment
Parking Brake Lever Stroke Adjustment 1. Remove the rear console cover (A). 2. Apply the brake pedal 20 times with the force of 10kg ...See also:
Vehicle data collection and event data recorders
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as
an air bag deployment or hitting a road ...
Relay Box (Engine Compartment) Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay box.
...
ICM (Integrated Circuit Module) Relay Box Description
The ICM relay is united with (outside mirror fold/unfold relay, front
deicer relay) which installed inside the lower crash pad.
...