Kia Soul: Output Speed Sensor. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Output Speed Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Removal

1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor connector(A).
3.
Remove the input & output speed sensor (B) after removing the bolts(2ea).

Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Output Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Output Speed Sensor. Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Power Seat Control Switch Inspection
    1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the po ...

    Components and Components Location
    Components (1) [Maunal Seat Type] 1. Front seat headrest 2. Front seat headrest guide 3. Front seat back cover 4. Front seat back heater 5. Front seat back pad ...

    Component
    1. Airbag module 2. Remote control upper switch 3. Remote control lower switch 4. Steering wheel assembly 5. Heated unit 6. Wiring 7. Steering wheel lower co ...