Kia Soul: Occupant Detection System (ODS). Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front passenger seat assembly.
(Refer to Body - "Front seat")
|
| 3. |
Remove the front seat shield inner cover.
(Refer to Body - "Front seat shield inner cover")
|
| 4. |
Remove the front seat shield outer cover.
(Refer to Body - "Front seat shield outer cover")
|
| 5. |
After loosening the mounting bolts, then disconnect the front
seat back assembly (A) and front seat cushion assembly (B).
|
Occupant Detection System (ODS). Installation
1.
Install in the reverse order of removal.
2.
Reconnect the battery negative cable.
3.
After installing the OD ...
See also:
Engine Mounting Removal and Installation
Engine Mounting Bracket
1.
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
2. ...
Clean air(if equipped)
When the ignition switch is in the ON position, the clean air function turns on automatically.
Also, the clean air function turns off automatically, when the ignition switch turns to the OFF posi ...
Glove Box Housing Replacement
•
Put on gloves to protect your hands.
...