Kia Soul: Line Pressure Control Solenoid Valve. Inspection
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve. Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the solenoid valve connector (A).
|
| 3. |
Measure resistance between solenoid valve signal terminal and
ground terminal.
|
| 4. |
Check that the resistance is within the specification.
|
Line Pressure Control Solenoid Valve. Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
See also:
Checking the engine oil level
Engine 1.6
Engine 2.0
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (abou ...
Power Door Mirror Switch Installation
1.
Install the power mirror switch.
2.
Install the front door trim after connecting the connector.
3 ...
Rear Glass Defogger Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and A/C control unit.
(Refer to Heating, Ventila ...