Kia Soul: License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to the lens.
5. Reinstall the lens securely.
High mounted stop light replacement
1. Open the tailgate. 2. Remove the cover. 3. Disconnect the connector by pressing the clip (1). Bulb type 4. Pull out the module from the high mounted stop light assembly by pulling both ...Interior light bulb replacement
Map lamp Room lamp Luggage room lamp Glove box lamp Sunvisor lamp 1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pullin ...See also:
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gen ...
Component Location
1. Hood switch
2. BCM & RF receiver
3. Key warning switch
4. Front door lock actuator & switch
5. Rear door lock actuator & switch
6. Tailgate ...
Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service.
Observe the instructions described in this manual, or the airbag ...