Kia Soul: Interior
Interior A
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior B
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior C
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior D
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Curtain airbag mounting hole (Ø6.6) |
Curtain airbag mounting hole (Ø6.6) |
Cowl crossbar mounting hole (Ø9) |
|
|
|
|
| Front door checker mounting hole (Ø13) |
Cowl side trim mounting hole (Ø8.5) |
Curtain airbag mounting hole (Ø7) |
|
|
|
|
| Seat belt height adjuster upper mounting hole (Ø15) |
Seat belt height adjuster lower mounting hole (Ø15) |
Rear door checker mounting hole (Ø13) |
|
|
|
|
| Seat belt pretensioner mounting hole (Ø14.5) |
Curtain airbag mounting hole (Ø6.6) |
Rear pillar trim mounting hole (Ø6.6) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Luggage side trim mounting hole (Ø8.5) |
Rear door striker mounting hole (Ø13) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Rear pillar trim mounting hole (Ø8.5) |
Luggage side trim mounting hole (Ø8.5) |
|
|
|
|
| Luggage side trim mounting hole (Ø8.5) |
Front seat front mounting hole (Ø11) |
Side step mounting bracket (7X12) |
|
|
|
|
| Side step mounting bracket (7X12) |
Front seat rear mounting hole (Ø11) |
Side step mounting bracket (7X12) |
|
|
|
|
| Carpet mounting hole (Ø6) |
Rear seat mounting hole (Ø13) |
Luggage side trim mounting hole (8.5X8.5) |
|
|
||
| Tail gate striker mounting hole (Ø15) |
Side Body
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Side Body B
* These dimensions indicated in this ...
Rear Body
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Tail gate hi ...
See also:
Engine number
Engine 1.6
Engine 2.0
The engine number is stamped on the engine block as shown in the drawing. ...
Automatic transaxle (if equipped)
...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Ve ...